BROWNIE Pflegehinweise

Faux leather

Lightly soiled surfaces can be cleaned with a slightly damp cloth or soft sponge. For heavier soiling, a mild soap can be used. Do not use harsh detergents, abrasive cleaners, or acid-based chemicals.

Remove stains immediately if possible to prevent them from setting into the material. Always wipe away dirt; do not rub it in. For dirt in grout lines, a soft-bristled brush can also be used to assist with cleaning.

In general, the product surface should be moistened as little as possible during cleaning. Always wipe surfaces dry thoroughly after cleaning.

Products made of synthetic leather should not be left in wet conditions, as this can damage them. You should also avoid exposing synthetic leather products to direct sunlight or heat for extended periods. Moisturizing care products for synthetic leather can protect the material and extend its lifespan.

Care products for genuine leather are not suitable for synthetic leather.


General

Clean regularly with a soft cloth or sponge and a solution of neutral, mild detergent (pH 7) and water.

Cleaners containing hydrochloric acid, formic acid, chlorine bleach, or acetic acid must not be used.

Do not use abrasive cleaners, rough cleaning cloths, metal brushes, scouring pads, or microfiber cloths.

Residues from personal care and cleaning products can cause damage—such as hair dye, perfume, aftershave, nail polish, toilet cleaner, or other harsh cleaning agents.

Drying and polishing the surface prevents limescale buildup and staining.

With regular cleaning and careful maintenance, the surfaces will retain their attractive appearance.


Pump head

Please clean the soap dispenser's pump regularly to prevent clogging. Soap residue in the pump head can be easily removed by soaking it and pumping it several times with warm water.

With regular cleaning and careful maintenance, the surfaces will retain their attractive appearance.